PDF  PubReader

, , , , , , and Yu**: An Implementation of DAQ and Monitoring System for a Smart Fish Farm Using Circulation Filtration System

Joo Hyeon Jeon* , Na Eun Lee* , Yoon Ho Lee* , Jea Moon Jang* , Moon Gab Joo* , Byung Hwa Yoo** and Jae Do Yu**

An Implementation of DAQ and Monitoring System for a Smart Fish Farm Using Circulation Filtration System

Abstract: A data acquisition and monitoring system was developed for an automated system of a smart fish farm. The fish farm is located in Jang Hang, South Korea, and was designed as circulation filtration system. Information of every aquaculture pool was automatically measured by pH sensors, dissolved oxygen sensors, and water temperature sensors and the data were stored in the database in a remoted server. Modbus protocol was used for gathering the data which were further used to optimize the pool water quality to predict the rate of growth and death of fish, and to deliver food automatically as planned by the fish farmer. By using JSON protocol, the collected data was delivered to the user’s PC and mobile phone for analysis and easy monitoring. The developed monitoring system allowed the fish farmers to improve fish productivity and maximize profits.

Keywords: Circulation Filtration System , DAQ System , Fish Farm , Monitoring System

1. Introduction

With the development of the fourth industrial revolution on using Internet of Things (IoT) technology [1,2], big data technology, and networks, automation of the existing aquaculture has gained momentum and several, the so-called, smart fish farms came into being [3-8]. The main function of the smart fish farms is to systematically manage the breeding environment of fish to improve productivity and increase the income of the fish farms.

The fish farmers select fish species that are resistant to various fish diseases and have good food value. Then, using circulation filtration system they carry out large-scale farming in large pools. The circulation filtration system can reduce the amount of water used in the fish farm by purifying and reusing the water used in the pools. In addition, any contaminated water is also stopped to flow to the surroundings by this circulation filtration which helps to preserve the environment around the fish farms.

In order to maximize the cultivation efficiency of selected fish species, it is necessary to maintain an optimal quality of the water of the pools.

Data acquisition (DAQ) system is used to monitor the water quality and to predict fish growth rate for optimal fish farming. Typically, the values of oxygen concentration, water temperature, and pH concentration are automatically collected and maintained. Other data such as [TeX:] $$\mathrm{NH}_{3}$$ concentrations, [TeX:] $$\mathrm{NO}_{2}$$ concentrations, feed amount, turbidity and fish's average weight, which are not automatically measured or require some time to analyze, should be added later by the fish farmers to form a complete database.

In the present work, a data acquisition and monitoring system was developed for an automated system of a smart fish farm which uses circulation filtration system.

This paper is organized as follows: Section 2 introduces the DAQ and monitoring system. Section 3 discusses the developed software tools for smart fish farm composed of database management tool, fish growth simulation tool, automatic fish feeder tool, and automatic fish dying rate calculation tool. Section 4 concludes this paper.

2. Overview of the DAQ and Monitoring System

Fig. 1 shows an overview of the DAQ system of the Jang Hang fish farm in Korea which uses a circulation filtration system.

Fig. 1.

A schematic of the data acquisition (DAQ) system.
1.png

The communication protocol between the sensors and the gateway is Modbus, which is one of the international standard field bus. Javascript object notation (JSON), a widely used protocol for web application [9,10], has been adopted as a communication protocol between data servers and PC or mobile phone. The fish farmers can use the data to monitor their fish farm conditions and analyze data to optimize the fish growth in a user's remote PC. The system is also developed to enable fish farmers to monitor data on their mobile phones, with the added ability of alerting and controlling emergencies.

Table 1 shows the specifications of components of the DAQ and monitoring system including the sensors and gateway.

Table 1.

Component specifications of the DAQ and monitoring system
Connectivity Note
Gateway Ethernet, OxyNet, JSON, Modbus, etc. Pacific system (OxyGuard)
pH sensor pH 4: 175 mV pH 0: 0 mV pH 10: -175 mV Electrode, impedance converter (OxyGuard)
DO sensor 2.5 to 5 mV/ppm Galvanic cell, self-polarizing, self-temperature compensating (OxyGuard)
Temperature sensor NTC output Built in NTC in DO sensor (OxyGuard)
Database TCP/IP Windows 10, MS Access 2016
PC Wi-Fi Windows 10, LabVIEW 2017, R-3.6.1, MS Access 2016
Cell phone Wi-Fi Android 10

3. Developed SW Tools for Smart Fish Farm

3.1 DB Management Tool for Fish Farms

Information from each aquaculture pool is automatically collected from pH sensors, dissolved oxygen sensors, and temperature sensors and stored in a server database. The data which cannot be collected automatically such as ammonia, [TeX:] $$\mathrm{NH}_{3}$$ concentrations, [TeX:] $$\mathrm{NO}_{2}$$ concentrations, turbidity and fish's average weight, should be entered manually by the fish farmers to construct a database. It gives the fish farmers the overview of the fish farm situation and alerts them about any emergency situation.

Data from the sensors in each pool was accumulated into the database automatically. The fish farmers can view the data history of each pool for a specific period through graphs and tables in the "Monitoring" tab as shown in Fig. 2. The word "OK" is shown if the current data is within the maintenance range of each pool, whereas "Alert" is shown and a notification LED becomes on if it is out of range.

Fig. 2.

Monitoring tab of the DB management tool.
2.png

The other data such as [TeX:] $$\mathrm{NH}_{3}$$ concentrations, [TeX:] $$\mathrm{NO}_{2}$$ concentrations, feed amount, turbidity and fish's average weight which were collected manually can be input, edited or deleted in the "Input" tab as shown in Fig. 3. All actions apply to the database immediately after execution.

In the "Management" tab as shown in Fig. 4, the ranges of the temperature, pH and dissolved oxygen values that must be maintained in each pool are set and saved as a configuration file for each pool. They are used to verify whether the data that have been collected automatically are within the maintenance range.

Fig. 3.

Input tab of the DB management tool.
3.png

Fig. 4.

Management tab of the DB management tool.
4.png

In the "Pool" tab, a visual display of the collected data and alert notifications for all the pools is provided, as shown in Fig. 5. The alert notification appears blue when the sensor data is normal, red for warning, and gray when the sensor is off.

In the "Fish species" tab, the fish species and the date when they were added to the pool are entered manually as shown in Fig. 6. The fish farmers can also enter some notes. The information is immediately stored in the database and used to calculate dying rate, fish population and to monitor the pool.

This program is written using LabVIEW and MS Access. Data is automatically collected every 600 seconds using JSON protocol. The fish farmers can extract all the data stored in the database into an Excel file for each pool.

Fig. 5.

Pool tab of the DB management tool.
5.png

Fig. 6.

Fish species tab of the DB management tool.
6.png
3.2 Simulation Tool for Predicting Fish Growth

A software tool was developed to simulate the growth of the target fish when aquaculture environment variables are controlled. The fish growth model used in the simulation was developed by Ursin [11], modified by Bolte et al. [12], and still continues to be developed. The fish growth calculation is expressed using the difference between fish anabolism and catabolism as shown in Eq. (1).

(1)
[TeX:] $$\frac{d W}{d t}=(1-a) b \tau \delta \beta f h W^{m}-k W^{n}$$

where

[TeX:] $$W$$ : fish weight (g),

[TeX:] $$t$$ : time (day),

[TeX:] $$a$$ : food assimilation fraction,

[TeX:] $$b$$ : food assimilation efficiency,

[TeX:] $$\tau$$ : temperature factor,

[TeX:] $$\delta$$ : DO (dissolved oxygen) factor,

[TeX:] $$\beta$$ : BOD (biochemical oxygen demand) factor,

[TeX:] $$f$$ : feeding level factor,

[TeX:] $$h$$ : food consumption coefficient ([TeX:] $$g^{1-m}$$/day),

[TeX:] $$m$$ : exponent of anabolism,

[TeX:] $$k$$ : coefficient of fasting catabolism ([TeX:] $$g^{1-m}$$/day),

[TeX:] $$n$$ : exponent of catabolism.

The fish farmers can estimate the growth rate of the fish by changing the temperature of the pool, BOD, DO, and ammonia on a daily basis as shown in Fig. 7.

Fig. 7.

Simulation of a fish growth.
7.png

The parameters on the left are the set points needed to calculate the growth rate of the fish. When the parameter files store the settings, they are automatically set. The setting values can be changed and saved again. Changes in water temperature, BOD, DO, and ammonia values can be set by date. The starting weight can be set in g (gram) and the simulation period can be set as well.

This program was written using LabVIEW. The solution of the differential equation is calculated by the fourth-order Runge-Kutta equation based on the set points and the variable changes.

3.3 Automatic Fish Feeder Management

A tool for automatically feeding fish for each aquaculture pool was designed. The amount of food required can be automatically calculated based on the water temperature, fish weight, and fish population in the pool. The fish farmers can check if the automatic feeding machine is running out of feed or there is any problem with the machine.

A new algorithm for determining the amount of food is being developed by using machine learning. For now, however, we shall use the following linear Eq. (2), which employs the traditional feed conversion ratio based on the temperature of water in each pool. The daily feeding amount is determined by Eq. (2) using the feed conversion ratio to the fish weight variation and water temperature.

(2)
[TeX:] $$S=\frac{G_{f i s h}}{F} \cdot N$$

where

[TeX:] $$S$$ : daily feeding amount (g/day),

[TeX:] $$F$$ : inverse of feed conversion ratio (a weight (feed)-weight (fish) ratio),

[TeX:] $$G_{f i s h}$$ : variation of daily fish weight (g/day),

[TeX:] $$N$$ : fish population.

The feed constant value can be found from Table 2 [13]. If there is no value in Table 2, the constant is interpolated by the water temperature and fish weight.

Table 2.

Example of feed constant determined by the fish weight and water temperature
Water temperature ([TeX:] $${ }^{\circ} \mathbf{C}$$) Average weight of fish (g)
3 10 20 50 100 200 300 400 500 600 700 800 1000
15 4 2.5 2 1.5 0.8 0.7 0.6 0.5 0.4 0.4 0.4 0.4 0.4
16 5 3 2.3 1.7 1.2 0.8 0.7 0.6 0.5 0.4 0.4 0.4 0.4
17 6 3 2.5 1.8 1.2 1 0.8 0.7 0.5 0.4 0.4 0.4 0.4
18 7 4 3 2 1.3 1 0.9 0.8 0.6 0.5 0.4 0.4 0.4
19 7 4 3 2 1.5 1.1 1 0.8 0.6 0.5 0.4 0.4 0.4
20 8 5 3.5 2.3 1.6 1.2 1 0.8 0.6 0.5 0.5 0.4 0.4
21 8 6 4 2.5 1.7 1.2 1.1 0.9 0.7 0.6 0.5 0.5 0.4
22 0 7 4.5 2.8 1.8 1.3 1.2 0.9 0.7 0.6 0.6 0.6 0.5
23 0 8 5 3 1.8 1.3 1.2 1 0.9 0.7 0.6 0.5 0.5
24 0 0 5 3 1.8 1.4 1.3 1 0.9 0.7 0.6 0.5 0.5
25 0 0 4 2.5 1.7 1.3 1.2 1 0.8 0.6 0.5 0.4 0
26 0 0 0 2 1.5 1.2 1.1 0.9 0.8 0.6 0.5 0 0
27 0 0 0 2 1.4 1.1 1 0.8 0.7 0.5 0 0 0

Automatic or manual operation is possible for each pool. The feed constant table for each pool can be set and stored. The fish farmers can set the start time and end time of the automatic feeding system.

The system monitor, as shown in Fig. 8, displays the environmental variables for each pool and shows the feed constant and feed amount calculated by the coefficient decision table.

Fig. 8.

System monitoring of auto fish feeder management tool.
8.png

From the coefficient decision table, as shown in Fig. 9, the feed constant and feed amount can be calculated using water temperature, fish weight and fish population and the values can be displayed. The fish farmers can store the coefficient decision tables for each pool. This program is written using LabVIEW.

3.4 Automatic Death Rate Calculator

The program calculates the probability of death of fish based on the aquaculture pool environment. It was developed using the R statistical program language and calculates the death probability of tilapia and rainbow trout using machine learning. Among the classification algorithms, [TeX:] $$\text { naïve }$$ Bayes classifier [14], which is known to have excellent performance when only a few observations are valid, was used to increase the accuracy of the prediction of dying rate.

In the [TeX:] $$\text { naïve }$$ Bayes classification, for the two possible stochastic results, viz. "dead" and "alive", Eq. (3) was used to find the maximum probability of the "dead" and "alive.""

Fig. 9.

Coefficient Decision table of the auto fish feeder management tool.
9.png

Fig. 10.

Automatic dying rate calculator.
10.png

(3)
[TeX:] $$\begin{aligned} &P\left(\text { dead } \mid x_{1}, \ldots, x_{7}\right)=\frac{1}{Z} P(\text { dead }) \prod_{i=1}^{7} P\left(x_{i} \mid \text { dead }\right) \\ &P\left(\text { alive } \mid x_{1}, \ldots, x_{7}\right)=\frac{1}{Z} P(\text { alive }) \prod_{i=1}^{7} P\left(x_{i} \mid \text { alive }\right) \end{aligned}$$

Here, Z is a scaling factor that converts the results to a probability and [TeX:] $$\left(x_{1}, \ldots, x_{7}\right)$$ are temperature, pH, dissolved oxygen, ammonia, [TeX:] $$\mathrm{NH}_{3}$$, [TeX:] $$\mathrm{NO}_{2}$$, and number of fish in the pool, respectively.

For the rainbow trout, the prediction accuracy of the "dead" model was 0.79, which showed a good performance. However, it is too early to discuss the performance of the model due to the lack of death data. In the future, as data accumulate, the prediction accuracy will improve and become more reliable.

As shown in Fig. 10, the data related to the current environment of each pool was shown to the fish farmer. If the calculated dying rate is high, a visual alert is displayed by turning the LEDs on.

4. Conclusion

We developed a data acquisition and monitoring system for an automated of a smart fish farm. Collected data using Modbus protocol was used to optimize pool water quality, to predict the rate of growth of the fish, the death probability of the fish, and to deliver food automatically as planned by the fish farm. The collected data was delivered to the user's PC and mobile phone through JSON protocol for analysis and monitoring.

The system was programmed using LabVIEW and included DB management tools, fish growth simulation, automatic fish feeder, and automatic dying rate calculator. The developed automation system allowed the fish farmers to improve fish productivity and maximize profits.

Acknowledgement

This research was supported by the Korea Institute of Marine Science   Technology (KIMST) (No. 20180352).

Biography

Joo Hyeon Jeon
https://orcid.org/0000-0002-0426-8763

She received B.S. degree in Information and Communications Engineering from Pukyong National University, Korea, in 2020. She is currently pursuing her M.S. degree in Smart Robot Convergence and Application Engineering from Pukyong National University, Korea. Her research interests include factory automation, embedded system and developing software using LabVIEW.

Biography

Na Eun Lee
https://orcid.org/0000-0002-0169-672X

She is currently pursuing her B.S. degree at Pukyong National University, Korea. Her research interests include factory automation and embedded system.

Biography

Yoon Ho Lee
https://orcid.org/0000-0002-5146-5444

He received B.S. degree in Information and Communications Engineering from Pukyong National University, Korea, in 2020. He is currently pursuing his M.S. degree in Smart Robot Convergence and Application Engineering from Pukyong National University, Korea. His research interests include factory automation and embedded system.

Biography

Jea Moon Jang
https://orcid.org/0000-0002-5429-3326

He is currently pursuing his B.S. degree at Pukyong National University, Korea. Her research interests include factory automation and embedded system.

Biography

Moon Gab Joo
https://orcid.org/0000-0002-2636-8634

He received his B.S. degree in Electronics and Electrical Engineering from POSTECH, Korea, in 1992, and an M.S. in Computer and Communications Engineering from POSTECH in 1994. His Ph.D. was on Electrical and Computer Engineering from POSTECH in 2001. Since 2003, he has been a professor at Pukyong National University, Korea. His research interests include intelligent control and factory automation.

Biography

Byung Hwa Yoo
https://orcid.org/0000-0002-3695-9972

She received B.A., M.S., and Ph.D. in Aquaculture from Pukyong National University in 1986, 1989, and 2018, respectively. Since 2012, she has been a director of research at Jang Hang Fish Farm, Korea. Her research interests include development and improvement of the aquaculture system such as recirculation aquaculture system (AIRRAS) and biofloc system (AIRBFT).

Biography

Jae Do Yu
https://orcid.org/0000-0001-5025-2431

He received B.A. in Business Administration from Kongju National University, Korea, in 2015. Since 2012, he has been a manager at Jang Hang Fish Farm, Korea. His research interests include aquaculture business and economics.

References

  • 1 K. Gafurov, T. M. Chung, "Comprehensive survey on internet of things, architecture, security aspects, applications, related technologies, economic perspective, and future directions," Journal of Information Processing Systems, vol. 15, no. 4, pp. 797-819, 2019.custom:[[[-]]]
  • 2 D. M. Park, S. K. Kim, Y. S. Seo, "S-mote: SMART home framework for common household appliances in IoT network," Journal of Information Processing Systems, vol. 15, no. 2, pp. 449-456, 2019.custom:[[[-]]]
  • 3 J. H. Chen, W. T. Sung, G. Y. Lin, "Automated monitoring system for the fish farm aquaculture environment," in Proceedings of 2015 IEEE International Conference on Systems, Man, and Cybernetics, Hong Kong, China, 2015;pp. 1161-1166. custom:[[[-]]]
  • 4 J. H. Huh, in Advanced Multimedia and Ubiquitous Engineering, Singapore: Springer, pp. 617-625, 2016.custom:[[[-]]]
  • 5 I. Ullah, D. Kim, "An optimization scheme for water pump control in smart fish farm with efficient energy consumption," Processes, vol. 6, no. 6, 2018.doi:[[[10.3390/pr6060065]]]
  • 6 M. Fore, K. Frank, T. Norton, E. Svendsen, J. A. Alfredsen, T. Dempster, et al., "Precision fish farming: a new framework to improve production in aquaculture," Biosystems Engineering, vol. 173, pp. 176-193, 2018.custom:[[[-]]]
  • 7 B. J. Kim, K. J. Shin, "Development of smart fish farming system based on IoT using wasted warm water energy," Journal of Institute of ControlRobotics and Systems, vol. 24, no. 2, pp. 155-163, 2018.custom:[[[-]]]
  • 8 J. H. Huh, "PLC-based design of monitoring system for ICT-integrated vertical fish farm," Human-centric Computing and Information Sciences, vol. 7, no. 20, 2017.doi:[[[10.1186/s13673-017-0101-x]]]
  • 9 J. Vanus, J. Machac, R. Martinek, P. Bilik, J. Zidek, J. Nedoma, M. Fajkus, "The design of an indirect method for the human presence monitoring in the intelligent building," Human-centric Computing and Information Sciences, vol. 8, no. 28, 2018.doi:[[[10.1186/s13673-018-0151-8]]]
  • 10 Y. K. Suh, K. Y. Lee, "A survey of simulation provenance systems: modeling, capturing, querying, visualization, and advanced utilization," Human-centric Computing and Information Sciences, vol. 8, no. 27, 2018.doi:[[[10.1186/s13673-018-0150-9]]]
  • 11 E. Ursin, "A mathematical model of some aspects of fish growth, respiration, and mortality," Journal of the Fisheries Board of Canada, vol. 24, no. 11, pp. 2355-2453, 1967.custom:[[[-]]]
  • 12 J. P. Bolte, S. S. Nath, D. H. Ernst, "A decision support system for pond aquaculture," in 12th Annual Report of Pond Dynamics/Aquaculture Collaborative Research Support Program. CorvallisOR: Oregon State University, 1995.custom:[[[-]]]
  • 13 Y. Avnimelech, M. Kochva, S. Diab, "Development of controlled intensive aquaculture systems with a limited water exchange and adjusted carbon to nitrogen ratio," Israeli Journal of Aquaculture-Bamidgeh, vol. 46, no. 3, pp. 119-131, 1994.custom:[[[-]]]
  • 14 G. Slaughter, Z. Kurtz, P. F. Hu, C. Mackenzie, L. Stansbury, D. M. Stein, "Prediction of mortality," in Proceedings of 2012 IEEE Biomedical Circuits and Systems Conference (BioCAS), Hsinchu, Taiwan, 2012;pp. 1-4. custom:[[[-]]]